Motorized Ball Valve

Product introduction

CKV3F... Series three-wire waterproof electric valve is suitable for on/off control of HVAC water system. It is composed of waterproof electric driver and valve body. The driver (actuator) adopts synchronous positive and negative motor to drive, the action is stable, prevent the water hammer to produce. Built-in limit contact enables power to be cut off when the valve is fully open or fully closed. The body is made of all-copper, with surface pickling and passivation technology. The valve can be opened or closed manually after the actuator is removed to facilitate on-site debugging or pressure test operation.

Two-way synchronous 4-wire large-thrust electric motor, two-way synchronous 4-wire large-thrust electric motor, two angular stroke limit switches, power off before the valve reaches 90° can keep the valve in its current position, which can be used as floating point control valve, and the limit switch can automatically cut off the power supply when the valve reaches 90°.
Low noise operation, the operating noise is less than 40Db. At the same time, the actuator can provide three-line two-control regulating valve or three-line one-control on-off valve for use.
The base is made of hard alloy ABS material, which is more wear-resistant and tough, and the valve and actuator are connected by copper lock nut, which can be quickly removed when installed, repaired or replaced.
Brass casting, the surface after pickling, passivation color or chrome plating and other special process treatment.
It is not easy to block, the closing pressure difference is large, and the blocking torque can reach 6NM. To deal with. It is not easy to block, the closing pressure difference is large, and the blocking torque can reach 6NM

CKV3F series electric ball valve is widely used in heating, air conditioning system, floor heating system, solar energy evacuation system, etc

1.Standard port, full port.
2.Fields of Applications: Hot water, cold water, gas;
3.Rated power:AC 220V±10% 50/60Hz   AC110v    24DC
4:Rater: <5W
5.Operating temperature: -5ºC≤T≤50ºC
6.Protection grade: IP66
7.Rotation time: 15 sec.
8.Torque: 4NM
9.Maximum Working Pressure: 1.6Mpa
10.0W. T.  5ºC≤T≤95ºC
11.Type of connection: Screw fixation
Valve connection size: 3/4" - 1-1/2"

Connection way : Female Thread Connections Comply With ISO228 (BS2779), Other optional connection way : Male threaded ,solder and PPR connection.
Surface color